[Fonzie]

Looks great. Hopefully you have a spare or two to sell after the preorders.

 

[underscore]

Will there be future batches or is this the only run? I don't even own a GRC yet but I'll definitely want one of these when I do.

 

[CawaGR]

Will there be future batches or is this the only run? I don't even own a GRC yet but I'll definitely want one of these when I do.

I'm probably not going to do another run, just because I sold my GRC and won't have the PCB anymore (I do a fit check on each one). There are still 5 or so key fobs that haven't been spoken for yet.

However if you're inclined to make one of these later, I will make the CAD files public. The laser cut titanium bits are from SendCutSend, screws and inserts are from McMaster, and I experimented with several SLA print shops (that was the bulk of the cost for me). If you have your own SLA printer then you can definitely make this yourself.

 

[NuBieGRCorolla]

delete the original message.

I will buy one?

 

[PhoenixM3]

I'm probably not going to do another run, just because I sold my GRC and won't have the PCB anymore (I do a fit check on each one). There are still 5 or so key fobs that haven't been spoken for yet.

However if you're inclined to make one of these later, I will make the CAD files public. The laser cut titanium bits are from SendCutSend, screws and inserts are from McMaster, and I experimented with several SLA print shops (that was the bulk of the cost for me). If you have your own SLA printer then you can definitely make this yourself.

I'll take one of the fobs, please.

 

[snowrx]

Once you've sold your stock, I'd be interested in the CAD file. Not sure where we'd post them, I'd share my PCB scan and micro-fob frame for the makers here. The frame's probably searchable in OnShape now.

 

[WideHippedCorolla]

I received my order on Tuesday and just now got around to buying the necessary CR2430 button cell to complete the kit. There’s a substantial and much appreciated reduction in the key’s footprint (nay, pocketprint). Thanks, @CawaGR!

 

[WideHippedCorolla]

 

[PhoenixM3]

I received my order on Tuesday and just now got around to buying the necessary CR2430 button cell to complete the kit. There’s a substantial and much appreciated reduction in the key’s footprint (nay, pocketprint). Thanks, @CawaGR!

Mine should arrive today. Looking forward to having a small fob....

 

[steroidstevo]

I would love one (or two) if there’s any still left

 

[shaneboss35]

Do you have any left for purchase?

 

[graywzc]

Any left for purchase?

 

[NuBieGRCorolla]

I gave op my info on 12/21, never heard back. He also sold the car, may just be gone for good.

 

[WideHippedCorolla]

i loved the design and convenience of @CawaGR’s minifob, but the case recently cracked after light use over the last month. I can’t imagine it’ll hold up for much longer, so I’ll be switching back to the OE fob soon. The minifob lacked sufficient rigidity to hold up to the repeated flexing of use.

I mention this to put y’all at ease about missing out on the minifob — I wouldn’t recommend it for anyone using it for daily driving. Super appreciative of @CawaGR’s ingenuity, nonetheless (even if he sold his GRC).

 

[CawaGR]

I gave op my info on 12/21, never heard back. He also sold the car, may just be gone for good.

Hey, I sent you an invoice around the same time. Let me know and I'll resend it.

 

[CawaGR]

i loved the design and convenience of @CawaGR’s minifob, but the case recently cracked after light use over the last month. I can’t imagine it’ll hold up for much longer, so I’ll be switching back to the OE fob soon. The minifob lacked sufficient rigidity to hold up to the repeated flexing of use.

I mention this to put y’all at ease about missing out on the minifob — I wouldn’t recommend it for anyone using it for daily driving. Super appreciative of @CawaGR’s ingenuity, nonetheless (even if he sold his GRC).

Ah, really sorry to hear that. Can you please send me a pic of where it gave out? If it's around the buttons i may have a replacement piece picking around.

 

[CawaGR]

I have 3 kits left. Here's a link to the OnShape project- you can copy it and modify it if you want to make your own. I used tough resin for the prints.

 

[WideHippedCorolla]

Ah, really sorry to hear that. Can you please send me a pic of where it gave out? If it's around the buttons i may have a replacement piece picking around.

@CawaGR - Yep! It’s a crack that goes from the middle button (unlock) to the left about halfway to the edge. I should be able to snap a pic in the morning. I freaking love the design and its thinness. How much you want for a new faceplate?

 

[WideHippedCorolla]

@CawaGR - Yep! It’s a crack that goes from the middle button (unlock) to the left about halfway to the edge. I should be able to snap a pic in the morning. I freaking love the design and its thinness. How much you want for a new faceplate?

I was wrong. It is cracking from the panic button.

 

[rohmbd]

I have 3 kits left. Here's a link to the you can copy it and modify it if you want to make your own. I used tough resin for the prints.

I'll take it....how do I pay?!.....I'm too new to pm back I guess so PM me how to pay please.