[Hank]

Pictures along the way:
Drag Racing results 01/19/25. More information here.

Notes:
1) Ran a total of (7) passes trying out different things for the best time/speed.
2) Best passes = 12.703@110.92mph, 12.754@110.32mph.
3) Shifted 6800-7000rpm 1-2, 2-3, 3-4. No lift shift 3rd to 4th.
4) 3/8 tank blended E30. Ethanol Content Analyzer displayed E34.
5) DA -1352ft to -1159ft. Ambient temp 45-46F.
6) UniClutch Track held strong. No issues.
7) 60ft times are pathetic. Cold track temp. Some racers were bringing water onto the starting line. Would benefit from drag radials.
8) Need to work on getting ECUTEK launch control working correctly. Stratified sent me a revised tune with 5000 rpm launch to try next time.

 

[Hank]

Had a friendly run-in with a Dodge Charger 392 Hemi today. I thought it would be able to keep up a little better than this. Had fun though. Don't know the guy. I'm sure he's scratching his head because my rear hatch is de-badged. Something from Toyota just put BUS LENGTHS on his 6.4L Hemi. My wife asked "you did not just do that" after I had temporarily put my flashers on. Hemi flashed his lights in response. LOL.

1.6L 99 cubic inches 3 cylinder GRC + Stratified E30 tune = BEAST MODE

 

[the901]

my rear hatch is de-badged.

100% way to run this car. I run without the side badges as well.

Love the video.

 

[hlfbkd420]

Nice numbers! I’m ready for the strip again too. Just got my car back from limit+1 and urw automotive in Chicago (1800 mile drive lol) so I can’t wait to see what it will do. 360whp on 91 with a full top end build (valve springs, cams, rocker retainers and head studs), new fmic, eventuri intake, down pipe and an artec 400 turbo.

Will tune for e50 after ecutek updates for injectors. Torque is similar to yours already so I’ll need to be nice to the transmission when that’s all done.

 

[NuBieGRCorolla]

i saw this when it was first posted. Put a chuckle on my face.
just watched it again…. Still puts a smile on my face.

 

[Hank]

Pictures along the way:
Front Bumper Fix installed. More information here.

Notes:
1) No wiring plugs have to be temporarily disconnected for this modification.
2) I recommend installing shims on both sides, even if only one side of your GRC front bumper is giving you issues.
3) This mod is completely reversible if by some miracle your front bumper stops popping out all by itself.