[GR IceCap]

Here is the YEN->USD conversion for the GROW parts. I subtracted their sales tax which is 10% because the prices on their website includes it. Surely the price will change once Cusco USA sells these parts stateside.

Front Diffuser:
ABS resin/base material $470.25
ABS resin/black (202) $604.60
ABS resin/semi-gloss black (original) $604.60

Side Diffuser:
ABS resin/base material $470.25
ABS resin/black (202) $604.60
ABS resin/semi-gloss black (original) $604.60

Rear Diffuser:
ABS resin/base material $537.43
ABS resin/black (202) $671.79
ABS resin/semi-gloss black (original) $671.79

Rear Wing:
FRP/Material $806.14
FRP/Black (202) $940.50
FRP/semi-gloss black (original) $940.50

Overfender:
ABS resin (base material) $456.81
ABS resin/precious black pearl (219) $591.17
ABS resin/precious metal (1L5) $591.17
ABS resin/Super White II (040) $591.17
ABS resin/Platinum White Pearl Mica (089) $591.17

Trunk Gate:
FRP/Material $268.71
FRP/Black (202) $403.07
FRP/semi-gloss black (original) $403.07

Exhaust: $1,713.05

Springs:
Sports Springs $463.53
Sports Spring/Morizo Edition $463.53

So what matches the Circuit Edition. The Black or Semi Black??

 

[GR IceCap]

Flow Designs just put their kit on pre-order.

Just ordered the front and side splitters, and rear spats in gloss. Not really a fan of the canards or winglet accessories.

I really like the subtle look.

View attachment 20222

View attachment 20223

I like that lip! Is it carbon? I would pick that and the rest Grow.

 

[GR IceCap]

Ohh I see. Your kit for your previous car showed up fast. I looked past that and thought you got it in 4 days after order.

I went with gloss black. I was going to do the textured because I have a core. Something about it being textured just doesn't seem right. But I'm also wondering how the gloss will look against my trim black parts.

Has an artisan spirits look. The front and sides plus shipping was cheaper then just the AS front lip. I'll roll with this for a little.

What bran you order?

 

[GR IceCap]

I find that interesting considering their website is actively advertising overseas sales and USD currency changes.

So did anyone get to order the Gro kit? I order from Back Hack before too but it was only the GR key pouch.. it’s pretty nice..

 

[GR IceCap]

Kinda wish I ordered the artwork lip kit.

What you order? Like this lip because it doesn’t extend much. This painted in gloss black with the rest Grow kit!

 

[GR IceCap]

I ordered the flow design. Just the front and sides.

Keep us posted with some pics 👍🏽

 

[GR IceCap]

This looks awfully close to the Glow kit.

 

[GR IceCap]

This should be interesting coming from Vertex. I wouldn't be surprised if it's a simple lip kit, but let's see what they offer.

I hope so, I just want the option of something nice and simple that doesn’t extend out to much.

 

[GR IceCap]

Well said, my thoughts exactly.

I’m more than satisfied with the Circuit hood, it does look better in certain colors like Heavy Metal. The problem is that for the most part people always looking buy or improve something. If it’s not the hood, is the wheel, if is it’s not the wheels is the exhaust or the spoiler/ wing and so on. Is the nature of people.

 

[GR IceCap]

I got the CF splitter lip installed today from Extreme Online Store. It fit great with no issues during the installation. View attachment 22944

Looking nice 👍🏽 are you doing the sides? How many inches is stinking out?

 

[GR IceCap]

Yes, I had planned to do an entire kit and was leaning toward Flow Design but I do like how this front lip follows the curve of the car. I wasn't sure how that gap would appear in person on the flat front lip of that kit, so hard to tell in the pictures. Extreme Online Store ended up being a sponsor for me allowing me to try some of their products and I really liked the way this looked. I just need to figure out what I want to do now for the sides and rear. It would be great if they came out with a matching set of sides for it as they do have a lot of things for other cars and said more would be coming for the GRC. I was very happy to see how well it fit too. It protrudes out about 2". View attachment 22958

Looks nice and 2 inches is not bad at all. Pics make it seem like it be around 4. 👍🏽

 

[GR IceCap]

Takahiro Ueno posted a teaser of the Vertex GR Corolla. What I see is a midwing, rear spat, side skirt, trim piece around the diffuser, and an exhaust that retains the OEM look. View attachment 23005

No pictures on side skirts and lip? If not hope they post some of those soon. I like the carbon trim around the diffuser.

 

[GR IceCap]

More pictures posted by Vertex. View attachment 23027 View attachment 23028
View attachment 23029
View attachment 23030
View attachment 23026

Ohh for the most part I’m liking it!! Don’t know about the back bumper corners, need to see the side skirts to judge the rest..

 

[GR IceCap]

Thanks Bro, love it!! The only things I wouldn’t get is the rear spats..

 

[GR IceCap]

The exhaust is from Exart.

Got a site?

 

[GR IceCap]

It is not publicly available yet.

EXART - High Performance Exhaust System

ワンオフマフラー / 可変バルブマフラー / 新基準適合マフラー / エキゾーストマニホールド / センターパイプ / フロントパイプ / メタルキャタライザー / サウンドジェネレーター対応インテークパイプ…

www.exart.jp

Thanks, I like the looks of it. Interesting to see how it sounds. Hope is available for the states..

 

[GR IceCap]

Question, this kit will be available for the States and how much you think I’ll be going for? Just opinion , never bought anything from then..

 

[GR IceCap]

Should he readily available through a japanese distributor like blackhawkjapan.

Thanks bud, I’ll keep my eyes open. I know is simple and that’s why I love it. Front and sides Exart and rear Seibon for me.

 

[GR IceCap]

Exart is the exhaust brand not the lip kit. The lip kit you are referring to is the Vertex.

Yeah got it 👍🏽

 

[GR IceCap]

Some more photos of the epsilon wing View attachment 23759
View attachment 23758
View attachment 23757
View attachment 23756
View attachment 23755

Damn that looks nice 👍🏽