Anyone having issues w the grille staying in? And anyone having issues w the side of the front bumper popping out? I am on my 3rd grille 🤦🏻♂️😂🤙
I don't. I mean it looks like factory. Fits flush.@Raaaaay any pics? Curious to see the end result
For sure man. Good for you they are taking it in. I was denied and had to go through Toyota Brand Engagement, filed a BBB complaint, and get my lawyer involved bc of all the issues I was having. Ended up not need my lawyer, canceled my BBB complaint, and Toyota HQ approved the repair.I noticed my grille had the three center tabs (by the Toyota logo) broken when I was washing it last weekend, took it to the dealer and the Service writer, Service Manager, and Parts Manager all agreed that there is no reason why they broke so I am taking in on Saturday so they can remove the bumper take pictures front and back and send them to Toyota for warranty. I'm crossing my fingers I get a new one but it'll also be good to document it so that Toyota knows that there is an issue with the grille.
Do it, we need as many written issues as possible so it's on record.Just noticed this morning that the tabs on my grill appear to be broken now. Car is stock and I've never taken the bumper off or hit anything. I already had problems with the dealer and Toyota when my tires wore prematurely and unevenly due to a bad factory alignment, and I lost that fight. It looks like I'm in for another fight with them about this...
Can you post a pic? I am not sure if you mean: retainer clips; grille fins; or...Just noticed this morning that the tabs on my grill appear to be broken now. Car is stock and I've never taken the bumper off or hit anything. I already had problems with the dealer and Toyota when my tires wore prematurely and unevenly due to a bad factory alignment, and I lost that fight. It looks like I'm in for another fight with them about this...
I tried to upload pics, but for some reason it just gets stuck loading. It's the same grill sag the OP posted about. Front plastic grill below the Toyota badge and along the upper edge has opened up and the clips/tabs that hold it on look to have just snapped clean off.Can you post a pic? I am not sure if you mean: retainer clips; grille fins; or...
Thank you for posting the pics. We can all keep an eye out for that condition.I tried to upload pics, but for some reason it just gets stuck loading. It's the same grill sag the OP posted about. Front plastic grill below the Toyota badge and along the upper edge has opened up and the clips/tabs that hold it on look to have just snapped clean off.
I took it in today, and they immediately tried to argue that there was an impact despite there being no evidence of such. The grill and paint are in excellent condition aside from typical small nicks from everyday road debris. They tried to point to some bug residue and say I must have hit something, but backed off when I pointed out that it's just dust from a moth that wipes right off with no blemish underneath.
At least it seems like they capitulated and ordered me a new grill to replace under warranty, but we'll see if they try to pull something when it gets installed.
This is called cheap Corolla bumperitis. You need this : **Limited Run** 555 Engineering GR Corolla Front Bumper ReinforcementView attachment 24206
Anyone having issues w the grille staying in? And anyone having issues w the side of the front bumper popping out? I am on my 3rd grille 🤦🏻♂️😂🤙 View attachment 24205
View attachment 24204
When will they be back in stock?This is called cheap Corolla bumperitis. You need this : Limited Run 555 Engineering GR Corolla Front Bumper Reinforcement
Just made another production runWhen will they be back in stock?
I did the same, will come in handy for the inevitable bumper issue. Been kinda reluctant pulling my bumper off again to install the FMIC because of the possible issue of the bumper popping off. Now I wont have that fear.I ordered a set preemptively, not sure how soon I'll need them but it'll be good to have them on hand when I do.