They have 3 different options. Which one did you get?
I just went all out and got the one that lights up with the high flow upgraded part.
Dang it, I just got excited and added it to the cart and overlooked that, oh well life goes on...
How you think the $159 one would work? It doesn’t come with the high glow induction kit. I guess that kit “ $159 “ wouldn’t flow air to the lower flap. Just like that kit more because it wouldn’t add the mismatch plastic at the top. Just not sure if I would get much benefit from it. What’s your opinion since you have one of the kit on?
I actually haven't received it yet. I am sure with just the $159 there would be some sort of benefit. But I think it would make a bigger difference having the high flow part also. For me personally, it was a no brainer to go with the one that will benefit the car the best. But if you don't like the look then that's a tough one, I guess the look did not bother me really.
Thanks. Keep us posted on fitment and performance etc 👍🏽.
Will do! I am not 100% sure on wiring it up, as the instructions are for the normal Corolla. If for some reason I cannot figure it out I will contact Velossa Tech...
I figured out the issue with you some getting rubbing, most people have the core like myself. You have a circuit, more hood clearance! Wow, thanks for helping me figure that out! That’s what’s happening, what a trip.
You are correct, no issues reported and they are the same parts. The only reason why there is an issue with using that air inlet thing on some of the GRC's are due to clearance. If you have the Core it will hit the inside of the hood and damage the part as well as remove paint from the hood. If you have the Circuit or Morizo, problem solved, as it has that hood bulge which allows the part to clear and not make contact with the hood.
I have the circuit edition and a very small part of the front Forge snorkel is hitting rubbing on a very small part of the under side of the hood. If you see my pictures and look at the small circular rubber piece, that's about the size. Smaller than a half a pinky nail...but it rubs and it sucks. I haven't found a solution that doesn't involve cutting something at the bottom of the bracket.
Just curious if you had to install the turbo inlet to use the intake? I am interested in this only if I can use the stock turbo inlet and snorkel.. Do you get a lot more intake sounds going from the flat panel to a cone filter?
Same thing happened to me recently when just installing the forge intake. P0101, after leaving the battery disconnected overnight it never came back and was just left with p2c90.
You dont have to install the inlet to use the forge intake, just have to use reduction coupler it comes with and it fits fine. You do get more intake noises, a more pronounced induction noise and slightly louder bov. The real sounds come from removing the turbo inlet that has noise chambers removed with the forge turbo inlet.
that’s not true mine rubbed and I have a circuit
I dont remember having to do that for my inlet duct, and mine doesn't rub with my Circuit hood...🤷🏻
I have the circuit edition and bought the complete forge intake system with the inlet. And I can 100% confirm that it does rub. It also doesn’t line up with any holes so the bracket underneath is pointless. I would fit the Yaris perfectly but not the GRC CE in the US (mine). Forge probably did that to get sales but it’s not a perfect fit.
