[A91supra]

Installed the Hella supertones, I did not reuse the stock mounting hole. I mounted both in the smaller holes beside it for symmetry. At first they didn't work, scraped paint of the frame, and they work perfectly.
Also, if you have big hands, good luck. Getting the nut on is a bitch!

 

[A91supra]

Can’t you bolt one on the other side?

Yes you can. The hole you thread the bolt through on the passenger side is also on the driver side. Bit more work and materials, but they're even.

 

[A91supra]

I thought the one on the passenger side is a little off compare to the original hole on the right? Some people drilled another hole to make it even on both sides?

Yes, there's no counterpart for the stock location on the other side. But there are 2 other holes you can use. You just need 2 bolts, 2 pairs of washers and 2 nuts etc.

 

[A91supra]

That's definitely not true on my car. There's an identical indentation on the passenger side on my car, it's just not drilled. I drilled it on mine, and they look pretty damn even to me.

View attachment 22128

I'm sure it is. Next to the stock location there's a hole, corresponding with a hole on the other side.