Add Yours: 2023 Toyota GR Corolla Reservation Tracking List

Diode Dynamics SS3 MAX Fog light retrofit

1686 Views 33 Replies 17 Participants Last post by djbert, 12 d ago

MESO

Discussion Starter · 1 mo ago

Stock fog lights are junk..so I am upgrading them. Diode Dynamics makes a SAE complaint fog with MUCH brighter output and better beam pattern.
Fun little project, I'll update as I complete it.

Scanned the OEM bumper so I can create a flush mount bezel.

Template for cutting. Big light.. tight fit.

CAD designed, resin printed(TESTER ONLY) final will be PA12 nylon

Perfect

New VS stock

See less See more

6

Reactions: 5

1 - 20 of 34 Posts

Leseid

· #2 · 1 mo ago

Incredible how things can be done like this now. Ever try making a form from your 3d prints and doing carbon fiber?

I wish I had a scanner like that, I have so many projects it would save time on.

Reactions: 1

Tokyotexan

· #3 · 1 mo ago

Leseid said:
Incredible how things can be done like this now. Ever try making a form from your 3d prints and doing carbon fiber?

I wish I had a scanner like that, I have so many projects it would save time on.

Carbon would be dope

Cptnslo

· #4 · 1 mo ago

Leseid said:
Incredible how things can be done like this now. Ever try making a form from your 3d prints and doing carbon fiber?

I wish I had a scanner like that, I have so many projects it would save time on.

Look at an einstar if you want an affordable scanner.

Reactions: 2

DrDevil87

· #5 · 1 mo ago

Bump because I want to follow this thread.
It looks good so far!

snowrx

· #6 · 1 mo ago (Edited)

Want to share your file for the bezel? I could clean up my SS3 drive light install!

Wish I had gone for the Max over the Pro for my high beam assist, but it seems like overkill for a fog!

ArtJDM

· #7 · 1 mo ago

Could you possibly share a "blank" style file without the cutout so people could install other styles of fog lights in there too?

Squatting Pigeon

· #8 · 1 mo ago

MESO said:
Stock fog lights are junk..so I am upgrading them. Diode Dynamics makes a SAE complaint fog with MUCH brighter output and better beam pattern.
Fun little project, I'll update as I complete it.

Scanned the OEM bumper so I can create a flush mount bezel.

Template for cutting. Big light.. tight fit.

CAD designed, resin printed(TESTER ONLY) final will be PA12 nylon

Perfect

New VS stock

Hey, that’s not a Baja designs light. 🤔

😂

Reactions: 2

GRC805

· #9 · 1 mo ago

Scanned the OEM bumper so I can create a flush mount bezel.

Template for cutting. Big light.. tight fit.

CAD designed, resin printed(TESTER ONLY) final will be PA12 nylon

Perfect

New VS stock

[/QUOTE]
I love my SS3 Max Pros on my Tacoma super bright wide light . GR Corolla sure needs an upgrade

See less See more

6

Nemesis

· #10 · 1 mo ago

It must be a generational thing, but I think these go completely against the design direction of the vehicle being square and orange. It seems like most people are trying to replace yellow lenses with clear…so I can’t see what look You are going for. Is there a pic of the rally car or vehicle look you are going for?
‘Also, can you print in black? Even in flat black it would make the final product look more upscale and less after thought. I applaud your abilities to make these changes.

Reactions: 2

snowrx

· #11 · 1 mo ago

Cptnslo said:
Look at an einstar if you want an affordable scanner.

Damn, you made me look.

black86

· #12 · 1 mo ago

replying so i follow.

Nemesis said:
It must be a generational thing, but I think these go completely against the design direction of the vehicle being square and orange. It seems like most people are trying to replace yellow lenses with clear…so I can’t see what look You are going for. Is there a pic of the rally car or vehicle look you are going for?
‘Also, can you print in black? Even in flat black it would make the final product look more upscale and less after thought. I applaud your abilities to make these changes.

this is to replace it for a higher output light. the headlights are aimed like shit to begin with. these would help on a night run. also, heres a link that explains why we replace the clear with yellow/amber:

www.caranddriver.com

Your Guide to Yellow Fog Lights

Yellow fog lights can improve visibility on days when the weather isn't at its best.

www.caranddriver.com

did you not read the post? its a test print.

Reactions: 3

MESO

Discussion Starter · #13 · 1 mo ago

Nemesis said:
It must be a generational thing, but I think these go completely against the design direction of the vehicle being square and orange. It seems like most people are trying to replace yellow lenses with clear…so I can’t see what look You are going for. Is there a pic of the rally car or vehicle look you are going for?
‘Also, can you print in black? Even in flat black it would make the final product look more upscale and less after thought. I applaud your abilities to make these changes.

No specific rally car I am modeling after. I just want GOOD useable light.. which now a days are usually in square pods. I personally think the square lights flow better with the vehicle lines. The design of the GR has many sharp angles and 90° corners which help them look more natural. I would say they fit the grill curves better than the stock round ones.
Yes, final bezel is black. Actually gloss black to blend with the CE grill.
There are many benefits from a yellow tinted lens when used in fog applications... Many articles out there.

Car Vehicle Vehicle registration plate Wheel Hood

Vehicle Car Automotive side marker light Grille Automotive lighting

Squatting Pigeon said:
Hey, that’s not a Baja designs light. 🤔

😂

I was actually very impressed with the cutoff and beam pattern of the SS3 so figured I’d give them a shot!

See less See more

2

Reactions: 3

Cptnslo

· #14 · 1 mo ago

snowrx said:
Damn, you made me look.

Don’t get me wrong a thousand dollars isn’t cheap but in comparison to scanners that can do similar scans. It’s a steal.

Reactions: 1

snowrx

· #15 · 1 mo ago

Cptnslo said:
Don’t get me wrong a thousand dollars isn’t cheap but in comparison to scanners that can do similar scans. It’s a steal.

If you order direct from the website they don't add sales tax, and there are bunch of $50 off coupon codes, so $939 shipped. Ebay had a warrantied refurb for $835 at one point.
But you may also have to budget for some PC upgrades, it looks like it wants a stout PC.

Reactions: 1

Squatting Pigeon

· #16 · 1 mo ago

MESO said:
I was actually very impressed with the cutoff and beam pattern of the SS3 so figured I’d give them a shot!

I’ve only heard good things, just haven’t tried the DDs myself yet. I’m sure I will at some point though!

Nemesis

· #17 · 1 mo ago

MESO said:
No specific rally car I am modeling after. I just want GOOD useable light.. which now a days are usually in square pods. I personally think the square lights flow better with the vehicle lines. The design of the GR has many sharp angles and 90° corners which help them look more natural. I would say they fit the grill curves better than the stock round ones.
Yes, final bezel is black. Actually gloss black to blend with the CE grill.
There are many benefits from a yellow tinted lens when used in fog applications... Many articles out there. View attachment 10996
View attachment 10995

I was actually very impressed with the cutoff and beam pattern of the SS3 so figured I’d give them a shot!

oh ok. Sounds like it will definitely stand out then.

Nemesis

· #18 · 1 mo ago

black86 said:
did you not read the post? its a test print.

Of course I did. I’m perfect and never miss any detail when having casual discourse.

Reactions: 1

snowrx

· #19 · 1 mo ago (Edited)

The OEM fogs just look too tiny, I can only think that Toyota wanted them to match the size of the headlight projectors. Without the square bezel the octagonal SS3 light blends a bit with the grille pattern.

Automotive parking light Grille Vehicle Hood Automotive lighting

See less See more

Reactions: 5

ArtJDM

· #20 · 1 mo ago

snowrx said:
The OEM fogs just look too tiny, I can only think that Toyota wanted them to match the size of the headlight projectors. Without the square bezel the octagonal light blends a bit with the grille pattern.
View attachment 11006

I assumed the OEM fogs were from the Toyota parts bin.

1 - 20 of 34 Posts