[jdm-v35]

Car: 03 G35 coupe

It is a project that I have had but not feeling motivated to work on till recently. Just pulled the engine, disassembled and cleaned and getting ready to reassemble.

Exterior:
Greddy front bumper
Kenstyle sides and rear
OEM carbon hood
Gialla Grill
JDM amber tails

Wheels/suspension:
SSR Vienna courage 18x9.5,18x11.5
295/30 rear 265/35 front tires
HKS hipermax RS coilovers with bags controlled by Airlift 3P
All bushings changed to energy suspension

Interior:
Bride x Cusco Digo seats with bride rails

Engine build:
Darton sleeved block bored to 3.9L
custom Arias extreme pistons
Pauter rods with M300 wrist pins
ARP main studs and L19 head studs
BC titanium valve springs and retainers
Tomei 280 11mm lift cams
dynosty billet girdle
Custom Radium fuel system with twin 450 Walbro pumps
denso 1600cc injectors
Exedy triple plate carbon clutch
3.7 final drive VLSD
HKS exhaust
Custom twin turbo kit using GTX2876R's

 

[shinylotad]

Nice! I posted about this in another thread, but I have a 6MT 03 G35 sedan. I love this car. Recently put in a 50k engine from an import shop. Has a low mileage cd009 in it as well. New clutch, flywheel. Other mods are just the headlights, clear side markers, and Tein street coilovers. Kinda ricey but, I'm more of a VIP person anyway.

 

[jdm-v35]

Nice! I posted about this in another thread, but I have a 6MT 03 G35 sedan. I love this car. Recently put in a 50k engine from an import shop. Has a low mileage cd009 in it as well. New clutch, flywheel. Other mods are just the headlights, clear side markers, and Tein street coilovers. Kinda ricey but, I'm more of a VIP person anyway.

Car looks nice though! clean and simple. I don't daily mine so it will pretty much become a race/show car. I will be aiming for 550-600hp to drive normally and I think the turbos will limit me to 950 or so on e85/race gas. with bigger turbos I think I could push higher.

 

[jdm-v35]

made some progress this weekend. short block rotating assembly is complete. just need to bolt heads on and then start putting accessories back on and engine should be done

 

[jdm-v35]

long block is complete, turbos are mounted. just need to put it back in the car and do fuel system and intercooler piping

 

[jdm-v35]

It will be thirsty! All feed fittings are dual -8an except for the return line which is a single -10an

 

[jdm-v35]

because racecar. getting ready to drop it back in.